型 号 MACHINE MODEL | ITEM | 单位 | LD-78/S
| 详细见附件 | |||
注射部分 | Injection Unit | unit | A | B | C | ||
螺杆直径 | Screw Diameter | mm | 32 | 35 | 38 | ||
螺杆长径比 | Screw L/D Ratio | L/D | 22 | 20 | 18.5 | ||
理论注射容积 | Shot Volume | cm3 | 84 | 100 | 119 | ||
理论注射质量 | Injection Weight(PS) | g | 76 | 91 | 108 | ||
注射速率 | Injection Rate(PS) | g/s | 55 | 65 | 75 | ||
注射压力 | Injection Pressure | MPa | 190 | 163 | 140 | ||
螺杆转速 | Screw Speed | rpm | 0-220 |
| |||
锁模部分 | Clamping Unit |
|
|
| |||
锁模力 | Clamp Tonnage | KN | 700 |
| |||
移模行程 | Toggle Stroke | mm | 300*300 |
| |||
模厚 | Max Mould Thickness | mm | 280 |
| |||
最小模厚 | Min Mould Thickness | mm | 300 |
| |||
拉杆内间距 | Space Between Tie-Bars | mm | 125 |
| |||
顶出力 | Ejector Tonnage | KN | 27 |
| |||
顶出行程 | Ejector Stroke | mm | 70 |
| |||
其他 | Others |
|
|
| |||
油泵压力 | Max. Pump Pressure | MPa | 14.5 |
| |||
伺服电机功率 | Motor Power | KW | 7.5 |
| |||
电热功率 | Heater Power | KW | 5.2 |
| |||
油箱容量 | Oil Tank Capacity | L | 150 |
| |||
外形尺寸(约) | OverallDimension(ABOUT) | m | 3.2*1.1*1.6 |
| |||
机器重量（约） | Machine Weight (ABOUT) | t | 2.6 | ||||
所有评论仅代表网友意见，与本站立场无关。